Reinforcement, Bar Bending & Placement
Examination of rebars, methods of cutting, bending, binding and placing in position Round hot-rolled mild steel bars is the predominant method of concrete reinforcement. Rebar works involve straightening and removal of kinks, cutting to length, bending to the required shape, laying in position, laying cover blocks from shutters and tying or
Fascia & Soffit Shuttering
Evaluation of common formwork methods and coverage units for soffits and fascias Fascia Shuttering Probably, the simplest form of shuttering is used on the perimeter of a voluminous concrete job, such as a footing or pile cap. The shuttering consists of a sheet or board that covers the side surface, supported by
Needle Vibrators
Vibrated concrete has been observed to have more strength than the non-vibrated ones. Concrete can be vibrated either internally or externally. Internal vibration is provided by internal vibrators, needle vibrators, etc. External vibration is provided by equipment like table vibrator. A concrete internal vibrator is a construction tool typically used during
Vibratory Plates
Granular soils, gravels, and hot asphalt mixes are loosely packed and hence it requires compaction. Compaction can be done in 4 methods Impact Vibration Pressure Kneading This compaction by vibration is provided by tandem vibratory roller if it is a larger area, for small areas vibratory plates are used. By this
Groove-cutting machines
Concrete expands and contracts constantly as it is exposed to temperature changes, the moisture content in air and drying of cement which results in shrinkage. Due to this process cracks may develop on concrete surfaces, and it is nearly impossible to prevent these cracks but can be controlled. Making grooves